NS-0326P-225- HiLook 100Mbps 24Port PoE Switch

• • Ports 1 to 24 support IEEE 802.3af/IEEE 802.3at standard.
  • When the switch is in Priority mode, it optimizes the cache capability of the ports. Ports 1 – 8 are high-priority ports, and all ports can communicate with each other.
  • When the switch is in Standard mode, it is an ordinary switch, and all ports can communicate with each other.
  • When the switch is in Isolate mode, all downlink ports of the switch cannot communicate with each other and can only communicate with G1 port and SFP port respectively.
  • When the switch is in Extend mode, all ports can communicate with each other. In addition, the transmission rate of the ports 17 – 24 reduces to 10 Mbps. The maximum transmission distance is up to 250 meters.
  • All ports support 6 kV lightning protection.
  • This switch supports Auto MDI/MDIX.
  • This switch supports store-and-forward.
  • This switch supports MAC address auto learning and auto aging.
  • This switch supports smart cache optimization.
  • This switch supports rack mounting.

Specifications

Model – NS -0326P-225

Port

• • Port amount – 26
  • Port type – 24*RJ45, 10/100 Base T(X) (Data/Power), 1*10/100/1000Base T port (Data), 1*1000Base X SFP port
  • Standard – IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af/at
  • Forwarding method – Store and forward
  • Flow control – Back pressure flow control in IEEE 802.3x full duplex
  • Priority queue – 8
  • MAC address table – 4 K
  • QoS  -Supported on ports 1 and 8
  • Switching capacity – 8.8 Gbps
  • Packet forwarding rate – 6.55 Mpps

Physical appearance/structure

• • Appearance – 0.6 mm sheet of galvanized metal without electric fan
  • Weight – 5.39 kg
  • Dimension – 294 mm × 215 mm × 44 mm
  • Mounting type – Rack mounting

Environment

• • Operating temperature – (0- 40) °C
  • Storage temperature – (- 40 -70) °C
  • Operating humidity – (10- 90) % RH, non-condensing
  • Storage humidity – (5 – 90) % RH, non-condensing

Power supply

• • Power input – AC: 100 240 V ~ 50/60 Hz
  • Reverse connection protection – Supported
  • PoE output power – 225 W
  • Power consumption – < 250 W

Other parameters

• • LED indicator – Link/Act LED indicators, PoE-MAX LED indicator, SFP1 LED indicator, G1 LED indicator, Power LED indicator